Tips and Tricks - EU_EN | Arlon Graphics

Tips & Tricks

Informational

Cut Graphic Film Adhesion Build (#15)

Digital Printing Preprint Considerations (#29)

Digital Printing: Graphic Protection (#31)

Digital Printing: On the Printer (#30)

Mottling of Vinyl Film (#13)

Overcoating and Decorating Vinyl Film (#19)

Paints and Coatings - Dry Versus Cured (#04)

Printing on Reflective Film (Series 2400 and Series 2450) (#12)

Proper Design for Airport Transit and Runway Signage (#27)

Reflective Film General Notes and Observations (#08)

Selection and Use of Application Paper (#11)

Shelf Life of Vinyl Film (#14)

What is Silvering? (#55)

Preparation

Cleaning a Vehicle Before Wrapping (#53)

Laminating and Contour Cutting with ProTec Series 3960 (#52)

Surface Preparation (#01)

Wall Surface Test for Vinyl Compatibility (#39)

Installation

Application Rule of Thumb for All Graphic Film Installs (#02)

Application Tips for Marine Marking (#37)

Contour Cutting and Laminating Printed Vinyl (#40)

Digital Printing Installation (#32)

How to Install on Rivets - Roller Methods (#50)

Installation Technique for Channels (#38)

Installations in Very Cold Weather (#07)

Lamination: Transfer Tape or Protective Overlaminating Film (#20)

Outgassing and Installing Arlon Print Media (#34)

Post-Heating (#16)

Reducing Bubbles Trapped by Vinyl Film (#17)

Removing Application Tape from Fleet and Vehicle Wrap Films (#23)

Use and Application For Etched Glass Film (#21)

Vehicle Wrap Tips (#35)

Wet Applications (#03)

Post Installation

Fleet & Vehicle Wrap Removal (#44)

Fleet Graphics Post-Care & Cleaning Instructions (#46)

Vinyl Removal Procedure for Wall Graphics (#42)

Don't See What You're Looking For?

Many of these TIPS come from our customer feedback and questions so be sure to reach out to us so that we can help you and in turn help others as well! Arlon Technical Services is here for you.

Contact Customer Service