Surface Preparation (#01)

INTRODUCTION

1. It is always important to clean surfaces just prior to any installation.
2. “Which preparation for which surface?” While many will work, a good rule of thumb for the last cleaning is:

CAUTIONARY NOTE:

While it may seem logical that a strong solvent will be the best cleaner for surfaces that are hard to stick film to - in the case of many plastics and paints this is wrong and can lead to premature sign failing due to embrittlement, cracking or loss of gloss. Use the mildest solvents possible and only clean until the surface dirt is gone.

* If the vehicle is new or has been waxed recently, Cromax PREP-SOL® 3919S™ CLEANING SOLVENT is recommended to remove wax residue prior to cleaning with IPA water mixture. † Latex paint is more sensitive to IPA water mixture. Avoid prolonged exposure of cleaner to wall during surface preparation.

Nie znalazłeś tego, czego szukasz?

Wiele z tych wskazówek zrodziło się dzięki opiniom i pytaniom naszych klientów, skontaktuj się więc z nami, abyśmy mogli pomóc Tobie, a Ty w ten sposób pomożesz innym! Pomoc Techniczna firmy Arlon jest po to, aby Tobie służyć.

Skontaktuj się z Działem Obsługi Klienta