Series 3510

Promotional Calendered Overlaminate

Series 3510 is a 3.2-mil (80 micron) calendered film with a clear, permanent pressure-sensitive adhesive. Designed to protect your printed image, Series 3510 is made of a monomeric facestock and available in a gloss or matte finish. Series 3510 is rated for outdoor durability of 3 years. See Arlon’s Print Media Total System Warranty, which is available at https://www.arlon.com/support/warranties.

Applications & Features

  • Protective overlaminate for all promotional calendered products
  • Short-term signage, kiosks and POP displays, and interior floor graphics*
  • Ideal for interior and exterior applications on flat surfaces
  • Arlon overlaminate film is designed to be laminated cold without any heat

*Series 3510 Matte, when used with recommended Arlon base films

Performance & Physical Data

Property Test Methods Typical Value
Surface Finish Gloss Meter 60° Reflection Gloss: 70 to 90 Gloss Units
Matte: 1.5 to 10 Gloss Units
Thickness Micrometer, Federal Bench Type 80 micron
Tensile Strength Tensile Tester with 51 mm jaw separation; crosshead speed of 5.1 mm/s, web direction ≥ 2.68 kg/cm
Elongation Instron Tensile Tester as above ≥ 250%
Shelf Life (In Box) Ideal Storage Temperature 21°C and 50% relative humidity 1 year from factory shipment
Application Temperature Range On clean, dry substrate 10°C to 32°C
Service Temperature Range Film applied to etched aluminum panels 24 hours prior to testing -29°C to 65°C
Dimensional Stability 70°C, 48 hours, on aluminum panel 0.13 mm
Peel Adhesion PSTC-1, 15 min, 21°C ≥ 0.27 kg/cm
Peel Adhesion PSTC-1, 24 hrs, 21°C 10.7N 25/mm
Liner Release TLMI Release at 90°, 760 cm/min 24.6 g/cm

Floor Applications

Series 3510 Matte is recommended for short-term interior floor applications when used with DPF 8200, DPF 4600GLX/MLX, DPF 510GTR/MTR or DPF 510GT/MT. Series 3510 Matte is classified under AS 4586:2013 Slip Resistance Classification of New Pedestrian Surface Materials, Appendix A: Class P3, Appendix B: Class D1. Expected life for these combinations is up to 3 months. To determine the best product for the application Arlon always recommends testing on the surface prior to using the above products. Product performance can vary greatly depending on the surface type, level of foot traffic, elemental exposure, carpet type, and floor condition. Due to these variables, Arlon is unable to offer a warranty for the performance, expected life, or clean removability of these products for floor graphic applications. See Arlon’s Standard Limited Warranty, which is available at http://www.arlon.com/support/standard-limited-warranty.

Please refer to Arlon’s Installation Guide for detailed techniques and best practices.

Terms & Conditions

The following is made in lieu of all warranties expressed or implied:

All orders and purchases made in connection with this document are governed and limited by Arlon’s Standard Terms and Conditions, which are incorporated in full by this reference and are available at http://www.arlon.com/terms-andconditions or in hardcopy by request.

Copyright © Arlon Graphics, LLC. All Rights Reserved.